A much cheaper way might have been to buy a couple of Novation Launchpads. 8x8 full RGB tactile buttons for 90€, MIDI-controllable. Four of those next to another for 16x16 at 360€ plus a little bit for cables and controller comes out at 1/3 the price
It would be larger (even with the mini), you’d have gaps between the four, and also the four middle buttons in each part have their corners clipped.
But you can get illuminated buttons for less money: https://www.ebay.com/itm/173922115935
Looking at teardown images of the launchpad pcb, it might be possible to shave down the ground plane on the two non-button sides enough that you could mate them up with no bezel interfering.
Re: illuminated tact’s: Old launchpads go for $25 - $30 on ebay, and you don’t have to purchase your own control and power components…
The size and button shape concerns would remain.
> I figured out what would be a reasonable amount to spend on the project and then multiplied that by 10.
I like the way you think.
Jeff Atwood has a great quote:
"I needed to replace 18 lightbulbs in my chandelier. Turns out 18 times any number is a lot. In cash"
This is fantastic.
I happen to own a physical pong table. Everyone loves it. [0] There is something magical about material and only-does-one-thing instantiations of digital things.
——
I am really looking forward to a flat table top screen consisting of millions of magnetically-controlled vertical-extruding rod pixels, with actual color controlled pixels along their length. For an amazing table display/extrusion of D&D dungeons and terrain, for miniatures.
A little sensor ability, and when the extrusion "scrolls" laterally, it could create little lips that move the miniatures too, so they stay "in place". And move NPCs around at the DMs direction. Now turn of the room lights, and use the light pixels not just for color, but for lighting effects like wall lamps flickering, add spooky position-distributed sounds...
That has to be coming soon, right?
Some part of me wants to describe it Claude, iterate, and say "Now polish that design, economically optimize the parts, link in the supply chain, and ship me the first review unit." That has to be coming soon, right?
The lines separating planes of reality, they are a blurring, quickly.
——
And optimize for repair when one of the thousands of actuators gets stuck or burns out…
Here’s a thought, though: you’ve seen the sand table + kinect projection mapping demo? What about that, plus a two-axis moving magnet sand mandala marble drawing table? The actuator could draw the path /sculpt the terrain, then release the marble and grab the figurines?
This would be something neat to do with a core memory array, just like this but bigger:
Technology Will Save Us, from a brighter past, produced the Arcade Coder as their swan song. It had 12×12 tactile buttons with color leds inside, a companion app to program it with scratch like code blocks, and interactive tutorials. It's ESP32 based. There's an effort to continue it's life, ast the app was on the app store for a brief time. https://github.com/padraigfl/twsu-arcade-coder-esp32
Totally off-topic, and I may be wrong, but I immediately loved the non-LLM writing-style and felt glued to the content just through the writing alone. It's getting rare.
I have not felt that it was becoming rare. Certainly on platforms like YouTube you can see automated processes cranking blandness at scale. I haven't found it encroaching on the topics that interest me like toy electronic projects, how some ancient game rendered its Sprites, colour space analysis, or a compiler that fits in a tweet,
I'm sure there are an abundant source of 'How I hustled a thumpawangy into $1000 a month in subscriptions" written by AI, but I doubt I could perceive a loss in that compared to the ones we had before.
Personally, I can barely stomach reading LLM writing. I find myself closing lots of articles after a sentence or two. I wonder how this plays out longer-term regarding engagement.
In probably another year or two I expect the metrics will show that it is a positive turn off. Unfortunately we're on the cutting edge of this particular movement and there's still a lot more "value" to be "extracted" from the general public before they all get wise to it too.
The next problem we'll face after that, with the 1-2 years newer AIs of the time, is that the default LLM voice is just a particular affectation created by the training, not "the voice of LLMs" or anything. It's trivial to kick them into a different style. I just used AI to do some architecture design documents this week, and prompted it to first look at about 1-2k words that I wrote myself all organically for the style. The good news is the resulting documents almost, but admittedly, not quite entirely, lack that LLM style. They're still prone to more bullet lists than I use directly; then again, in this context they were fairly appropriate, so I'm not too triggered by the result.
The bad news is, that's all it takes to make AI writing that isn't in that default tone. It's not that hard. Students cheating on essays have already figured it out, the spammers really can't be that far behind. Probably more stuff than we realize is already AI output, it's just the stragglers and those who don't really care (which I imagine is a lot of spammers, after all) who are still failing to tweak the style. They'll catch up as soon as engagement falls off.
lcamtuf is doing that for decades!
I saw one in a computer museum in Switzerland. It was a much larger field, it was just large orange LEDs (or were they tubes?), but it also cycled between a dozen of different cell automata games. Something about being able to see individual "pixels" made it really mesmerizing.
When I was a teenager, I read a book about assembly language for the commodore and implemented the game of life in a really simple way. I just used the text screen. To switch on a cell, I would put an asterisk ('*') in it. Then I could run my machine code program and it would evolve according to the rules of the game of life.
The answer to a lot of "wow, how did the 8-bit machine pull that off? it seems like that would eat a lot of RAM" is that the framebuffer is the data storage. You were literally looking at the primary data store itself, because when a full-resolution framebuffer was 1/4th your addressable RAM (and slightly more than that for your actual RAM since you couldn't ever quite use all 64KB no matter how you mapped it), you need to get the most bang for the buck out of that RAM usage as you can.
And who didn't do that! :)
You could also 4x the resolution by using half- and quarter-block characters from the top half of the ASCII table (or it'd be the PETSCII one i C64 case).
> And who didn't do that! :)
Exactly. It's even how I taught myself extremely basic Pascal -- getting my BASIC Life program running in Pascal. With asterisks.
A taught a friend at uni, who was a much better programmer than me, how the algorithm worked. He did a pixel-by-pixel version in machine code, but it was a bit slow on a ZX Spectrum.
So he did exactly the quarter-character-cell version you describe. I wrote the editor in BASIC, and he wrote a machine-code routine that kicked in when told and ran the generations. For extra fun he emitted some of the intermediate state to the border, so the border flashed stripes of colour as it calculated, so you could see it "thinking". Handy for static patterns -- you could see it hadn't crashed.
I've been considering doing a quarter-cell Mandelbrot for about 30Y now. Never got round to it yet.
Something like those switches might be made very cheaply with a 3D printer, possibly a laser cutter, some transparent or semitransparent acrylic sheet, tactile switches and some LEDs. I designed a cheapo replacement for $50 tellite switches and got the price down to about $0.60 Not quite the same, as these are a lot bigger, and getting things down to the desired size might be troublesome. Anyway, here's a little video of my fake cheapo tellite switches: https://www.youtube.com/watch?v=LaenrgPVCjc
My Alma matter has a jumbo version of this, in which the game if life is one of several available mode https://en.wikipedia.org/wiki/BioWall
Lovely project indeed. If you want to build your own: I found a whole bunch of much cheaper illuminated switches on AliExpress within minutes.
A thousand bucks for 17x17 touchscreen. Add a painting frame, hang it on the wall, and you made yourself amazing art for cheap.
Great idea and execution. I like your thinking.
I wonder if going for keyboard switches with RGB could bring the price down, if you then either print the keycaps yourself, our use a 3d printing service. 23 Cherry MX switches cost 20€, that‘s roughly 260€ for a 17x17 matrix.
Should be doable to implement GoL on an ortholinear RGB keyboard using QMK
I mean - that sounds like an awesome project in itself!
I love this and would love to see it on a wall at our office or something like that. Maybe there's smaller/cheaper led/switches that would work in a handheld version.
Nicely done! Scale matters. If you make something big enough relative to its expected size, it will impress and captivate, even if it's simple. General observation, not that the construction here was by any means simple.
Nice. A friend of mine just picked up a Linnstrument, and I’m very tempted to create a Conway’s Game of Life-based musical visualization for it.
Neat! For homebrew / "iot" stuff, there's LED button panels like https://www.adafruit.com/product/1929 that could work.
Très cool.
A grid of capacitive touch sensors could be printed directly on the pcb, bringing down costs by a degree of magnitude. Real switches are much more satisfying though.
I want to do a game like lights out. I'm thinking in 3d printing transparent caps and using dirt chip pcb switches and standard leds. The cost must be also down to 30 cts. Would be like a middle ground.
This is fantastic, but there's no way I am taking the time to build one, and the cost is a little frightening...
This isn't what this is about, but I wonder if anyone has created a fully mechanized version of Conway's Game of Life. The fact that you only have to follow 4 rules, and each cell only needs to observe its neighbors to follow those rules, makes me wonder if it's possible to track these things mechanically. I unfortunately don't know enough about mechanical engineering to do such a thing.
I wonder is there a version GoL where every bit on a computer-display or LCD TV is one cell? How does it look?
Do you mean every pixel or every sub-pixel? Sub-pixel is interesting because the geometry of the grid isn't going to be the same from one screen to the other. It might also look compressed horizontally.
Conversely, it'd be cool to play it on an large empty office building.
One window = one pixel.
Like Blinkenlights https://m.youtube.com/watch?v=PZRUtKYCpms
I bet that the author would really get a kick out of the T2 Tile Project.
how is this real life more than a monitor, its just bigger pixels. i was expecting programmable live cells or something mechanical
Check out the video - you can draw on the game by pressing the switches.
I've always wanted something like this board, buttons which can light up (preferably a few colours), to use to make games. Anyone ever found such a board which is hackable / programmable?
Novation Launchpad used to be exactly that: you send MIDI CC messages with proper values and you can light up the grid (with different colors).
Did that a few years back, i guess this might still be possible
> used to be
Looks like they are still around? https://novationmusic.com/launchpad
Also seems to be in stock locally.
The device that I think popularized that design (citation needed) was the Monome (https://monome.org/) that looks like it is also still around and it has (always had?) some kind of open source license (https://github.com/monome).
https://www.adafruit.com/category/280, they're ready made from 4x4 to 16x8 but in theory you can just put more modules into an enclosure.
Eh. I thought they had somehow created a physical realization of Conway's Game of Life.
this matches my experience exactly
I don't want to build this or pay for it, but I really want to mess with it for an hour.
You need a science museum!
It is beautiful
Would be interesting to do this with people and observe the inevitable mistakes they make.
Now that would be simulating life witg life.
Well, people can die if they have too many or too little of neighbors, but they can't be summoned from a thin air if they have just enough neighbors. Hard to simulate life with people. Though if you are ready for a simulation step of 20 years or so... But it still may not work, because you need people of two opposing sexes and compatible genders near the empty sell to fill it. In Game of Life all cells are hermaphrodites.
But I agree mistakes might be fun to watch.
That's not a "physical" version of game of life -- that's a digital version, like every version, but with bigger pixels.
Does make me wonder if it's possible to make a physical / analog / mechanical version of Game of Life.
fake edit: yes, kind of: https://www.eurobricks.com/forum/forums/topic/164622-moc-mec...
sure is - i made one using poker chips and a chessboard - i had to do the computations using my own brain though :-(
https://latedev.wordpress.com/2011/06/25/a-poker-chip-comput...
I think "physical" refers to the fact that you initialize the state by pressing physical buttons. That's quite accurate.